Y splitter cable
Y splitter cable for light output.
When the ebike is equipped with headlights operated by the controls on the handlebar and then powered by the same battery of the ebike, it means that the light output of the engine is occupied for the connection of the same. To obtain an additional parallel output for the connection and operation of the FURIOUS device on / off lights, the Y splitter cable must be installed which allows an additional output to be obtained.
Installation is very simple, just disconnect the connector between the engine and the headlights and connect the Y-cable.
Y splitter cable
When the ebike is equipped with headlights operated by the controls on the handlebar and then powered by the same battery of the ebike, it means that the light output of the engine is occupied for the connection of the same. To obtain an additional parallel output for the connection and operation of the FURIOUS device on/off lights, the Y splitter cable must be installed which allows an additional output to be obtained.
Installation is very simple, just disconnect the connector between the engine and the headlights and connect the Y-cable.
The Y splitter cable is available for the following engines:
– Version for Ananda M60 M81 M100 M230, Bafang M400 M420 and Yamaha PW-X PW-X2 PW-SE PW-TE PW-ST (mod. CY-01)
– Version for Giant Syncdrive Core, Life, Pro, Sport (PW-X2) and Oli Sport (mod. CY-02)
– Version for Yamaha PW-X3 and PW-S2 motor (mod. CY-03)
