SpeedFun Furious Evo for Bosch

Name: SpeedFun Furious Evo for Bosch
SKU: FU_EVO_EA_BOSCH
Availability: InStock

122,73€

SpeedFun Furious Evo is a tuning for ebike with Bosch motor that allows you to remove the 25 kmH speed block by fully exploiting the potential of the motors.

This speed release device is specially designed for all Bosch motors (from Gen. 1 to Gen. 4 including CX 2020/2021) regardless of the display or the handlebar control.

All SpeedFun Furious Evo speed release devices can be activated and deactivated at any time and without the need for connections to the light output.

SKU FU_EVO_EA_BOSCH Categories For Bosch, Furious

What is the tuning for Shimano SpeedFun Furious Evo?

The function of the Furious Evo tuning device for Bosch is to electronically manipulate the rotation speed of the rear wheel and to communicate to the engine a speed always lower than 25 KmH, this allows to obtain a real speed with a very high active engine. The maximum speed limit is given by the power of the engine added to the power expressed by one’s legs (info).

This speed release device is compatible with Intuvia, Purion, Nyon (including new Nyon 2021), Kiox, Cobi and Smart Hub displays and can be installed on Bosch Gen. 1 (Bosch Classic), Gen. 2 (Active, Performance and Performance CX 2014, 2015, 2016, 2017, 2018, 2019 and 2020), Gen. 3 (Active Line, Active Line Plus 2018, 2019 and 2020) and Gen. 4 (Performance CX and Performance Line 2020 and 2021).

When the device is active, the display will show the exact speed up to about 20 KmH approx, beyond which a manipulated speed will always be shown below 25 KmH.

Speedup Furious Evo can be activated and deactivated and maintains the setting even after the ebike is turned off. It can be installed on e-bikes with any type of display or side control as well as on e-bikes without a display.

The new technology of this tuning module for Bosch does not require the activation of the engine light output or interventions with diagnostics or apps. It is supplied plug and go ready to use and installs in a very simple way thanks to the connectors with which no physical modification of the ebike is necessary.

ATTENTION!
This device is not compatible with Bosch “smart system” motors.

Additional information

Installation	Internal (totally invisible from the outside)
Dimensions	31 x 16,5 x 7,5 mm
Connections	Equipped with original and/or compatible connectors (does not require any physical modification to the ebike wiring)
Assistance	Over 60 km/h
Compatible motor	Bosch Gen. 1 (BES1), Bosch Gen. 2 (BES2), Bosch Gen. 3 (BES2), Bosch Gen. 4 (BES2)
Compatible speed sensor type	Classic sensor (magnet on the spokes or on the disc)
Compatible displays	Intuvia, Kiox, Nyon (including new Nyon 2021) and Purion
Data displayed (on display or app)	Altered (variables above a certain threshold)
Device power	No external power supply required