SpeedFun Furious Evo easy+ for Fazua Ride 60
SpeedFun Furious Evo is an ebike tuning that allows you to remove the 25 kmH speed block and increase active assistance up to speeds that can reach 60 KmH by fully exploiting the potential of the Fazua Ride 60 system.
This tuning is specially designed for the Fazua Ride 60 systems both with Fazua led HUB + Ring Control and with Fazua Control HUB mostly mounted on Riese and Muller, Canyon, Focus, Transition Bikes, Pivot Cycles, Wilier and Haibike Lyke.
All SpeedFun Furious Evo speed release devices can be activated and deactivated at any time and without the light output.
What is SpeedFun Furious Evo tuning for ebike with Fazua Ride 60 system?
The function of the Furious Evo tuning device for Fazua Ride 60 system is to electronically manipulate the rotation speed of the rear wheel and to communicate to the engine a speed always lower than 25 KmH in order to obtain a real speed with a very high active engine. The maximum speed limit will therefore be dictated by the power of the motor added to the power expressed by one’s legs (info).
When the tuning device is active, having no communication with the display, it will show the halved data on the display (or app) starting from a certain threshold.
SpeedFun Furious Evo can be installed on e-bikes equipped with the Fazua Ride 60 system both with Fazua led HUB + Ring Control and with Fazua Control HUB mostly mounted on Riese and Muller, Canyon, Transition Bikes, Pivot Cycles, Wilier and Haibike Lyke.
The Furious Evo tuning device for Fazua Ride 60 can be activated/deactivated with a very practical system (for more information see the instructions) and does not require the activation of the motor light output. The device is supplied plug and go ready to use, it is installed in a very simple way thanks to the original connectors with which no physical modification of the ebike is necessary.
ATTENTION!
This device is not compatible with Fazua Ride 50 motors. The product compatible with Fazua Ride 50 motors is available HERE.
Ebike with Fazua ride 60 system where the Furious Evo device has been successfully installed
(this list is illustrative and not exhaustive)
– Canyon Roadlite:ON 8 LTD
– Canyon Commuter:ON 8 LTD
– Canyon Commuter:ON 8 LTD mid-step
– Pivot Shuttle SL
– Riese & Muller UBN Seven
– Riese & Muller UBN Five
– Wilier ultra hybrid
– Haibike Lyke
– Focus Jam2 SL
– Cervelo Rouvida
Additional information
| Installation | Internal (totally invisible from the outside) |
|---|---|
| Dimensions | 37 x 22 x 7,5 mm |
| Connections | Equipped with original and/or compatible connectors (does not require any physical modification to the ebike wiring) |
| Assistance | Over 60 km/h |
| Compatible motor | Fazua Ride 60 |
| Compatible displays | Any display and handlebar control |
| Data displayed (on display or app) | Altered (halved above a certain threshold) |
| Device power | No external power supply required |
Be the first to review “SpeedFun Furious Evo easy+ for Fazua Ride 60”
Assembly and use instructions
Use and installation instructions Furious Evo for Fazua Ride 60
Reviews
There are no reviews yet.